ImageClip Laser Self Weeding Transfer Paper A4

ImageClip Transfer Paper is printed red on the back.
ImageClip Transfer Paper is printed green on the back.

Printing Instructions

• Using a color laser printer or a color laser copier, print your image onto ImageClip Imaging Paper. There is no need to trim the paper. The ImageClip transfer method leaves no background on the polymer.
• Using a commercial heat press, press the imaged sheet against an ImageClip Transfer Sheet. Press for 20 seconds at 225 degrees Fahrenheit, and peel the papers apart while hot. The transfer sheet coating will now cover the imaged areas of the imaging sheet
• Preheat the press so that the platen is at the correct temperature before transferring your first image. PLace the image side down and press it at:
  • Manual heat press: 375 degrees for 15-20 seconds with heavy pressure
  • Air powered heat press: 375 degrees for 15-20 seconds, use 60 psi or greater, or 400 degrees for 5-10 seconds, use 60 psi or greater.
• After pressing the treated imaging sheet onto the desired garment or other substrate as described above, remove the paper while still hot.

• ImageClip is recommended for use in the following color laser copiers and printers:

  Printers

• Tally 18406
• Oki C 5150 N
• Oki C 9300
• Textronix Phaser 740

  Copiers:

  • Canon CLC 700