Your source for heat transfer paper- JetWear Dark A3 & A4, JetPro SofStretch A3 &A4, TransferWear Dark 8.5"x 11" & 11" x 17", TransferWear CLP 8.5"x 11" & 11" x 17", TransferWear Premium 8.5"x 11" & 11" x 17".

USE OUR TRANSFERWEAR DARK AND JETWEAR DARK IN PLOTTER CUTTERS!

€7.20

TransferWear CLP size 11" x17" Light T-shirt Transfer Paper

Quantity

Our Price: €7.20

NOW AVAILABLE IN PACKS OF 50

LASER PRINTERS ONLY-that DO NOT use fuser oil

Printing Instructions

Set copier/printer settings to "heavy/card stock".
Fan sheets of paper on all four sides to reduce static charge.
Load transfer paper so blank side receives image. If paper is notched, print side will be facing you when notch is in upper right corner.

Preparing to Transfer

Preheat heat press to 400 °F/205°C.
Trim away any unprinted paper, leaving 1/8" border around image.
Choose white or light-colored substrate made of 100% cotton, cotton/poly blend, or 100% polyester.

Transferring with Commercial Heat Press

Place wrinkle-free garment on press pad.
Place transfer on garment, image side down.
Press at 400 °F/205°C with high pressure for 15 seconds.
Remover from heat and peel transfer immediately.

Washing Instructions

Wash garment seperately (first time only). Turn inside out.
Machine wash cold with color-safe detergent. No bleach.
Remove promptly from washer to prevent bleeding. If bleeding occurs, rewash immediately.
Tumble dry with low heat. Add towels to facilitate drying.
If garment needs ironing, do not iron directly on transfer.